Alloy Steel WP1 Pipe Fittings Supplier. ASTM A234 Alloy Steel WP1 Buttweld Fittings Manufacturer in India
Unichem Steel & Alloy Pvt. Ltd. is a known manufacturer, exporter, and trader of Alloy Steel WP1 Pipe Fittings, which appears to fall between both the stainless and nickel categories as it contains characteristics of both. An advantage of Alloy Steel WP1 Pipe Elbow is that it can be precipitation hardened and strengthened by heat treatments. Alloy Steel WP1 Tee Butt Weld Pipe Fittings has bright annealed or bright annealed and cold rolled grease, where ultra-bright finishes are used for decorative applications. Applications of Alloy Steel WP1 Reducer are limited to a maximum temperature of 1000 Degree F per ASME. The high–temperature strength of Alloy Steel WP1 Cross Butt Weld Pipe Fittings is basically the same in the range of 950 Degree C to 1150 Degree C. There is no risk of intercrystalline corrosion on cooling or welding in Alloy Steel WP1 Stub End due to the low carbon content. The maximum service temperature of Alloy Steel WP1 End Cap Butt Weld Pipe Fittings is at 450 Degree C. Hot-working temperatures in Alloy Steel WP1 Dish Cap Butt Weld Pipe Fittings should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F. Alloy Steel WP1 Bend Pipe Fittings is often used in chemical processing, vacuum furnaces, and mechanical components.
Largest Stockist and Manufacturer of ASTM A234 Alloy Steel WP1 Pipe Fittings, Grade WP1 Buttweld Elbow, Cross, Equal Tee, Bend, Stub End, Long Stub End, 1D Bend, 45 Degree Elbow, 90 Degree Elbow, 3D Bend, Dish Cap, Collar, 5d Bend, Lateral Tee, Pipe Nipple, 180 Deg Bend, Short Radius Elbow, Eccentric Reducer, Concentric Reducer, Pipe Cap in Mumbai
- Alloy Steel WP1 Buttweld Fittings Specifications
- ASTM A234 WP1 Fittings Chemical Composition
- ASTM A234 WP1 Fittings Mechanical properties
- Alloy Steel WP1 Buttweld Pipe Fitings Dimensions
- Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- In Stock Grades of Alloy Steel Buttweld Fittings
- Alloy Steel WP1 Fittings Manufacturing Standards
- ASME SA234 WP1 Pipe Fittings Applications
- SA234 Alloy Steel WP1 Pipe Fittings Ready Stock
- Alloy Steel WP1 Buttweld Fittings Exporter
- ASME SA234 WP1 Pipe Fittings Supplier
- ASTM A234 WP1 Alloy Steel Buttweld Fittings Types
- Alloy Steel WP1 Elbow Fitting
- Alloy Steel WP1 Tee Fittings
- Alloy Steel WP1 Reducer Fittings
- Alloy Steel WP1 Cross Fitting
- Alloy Steel WP1 Stub Ends
- Alloy Steel WP1 End Caps
- Alloy Steel WP1 Pipe Fittings Bends
- Welded & Seamless Alloy Steel WP1 Pipe Fittings
Most Trusted Supplier and Exporters of ASME SA234 Chrome Moly Alloy Steel WP1 Buttweld Fittings, Alloy Gr. WP1 Welded Pipe Fittings, Alloy Grade WP1 Seamless Pipe Fittings in South Africa, Saudi Arabia, Spain, Kuwait, Singapore, Malaysia, UAE, Italy, Nigeria, Iraq, Thailand, Turkey, Vietnam, Oman, Qatar, Myanmar, Sri Lanka.
Alloy Steel WP1 Buttweld Fittings Specifications
ASME SA234 / ASTM A234
Standards / Dimensions
ASME/ANSI B16.9, MSS-SP-43, ASME B16.28
Size & Thickness
1/8”NB to 48”NB in Sch 10s, 40s, 80s, 160s, XXS.
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Seamless, Welded, Fabricated
Elbow, Tee, Reducer, Cross, Stub End, End Caps, Bend
ASTM A234 Alloy Steel WP1 Buttweld Fittings Types
ASTM A234 Alloy Steel WP1 Fittings Chemical Composition
|C, %||Mn, %||P, %||S, %||Si, %||Mo, %|
|0.28 max||0.30- 0.90||0.045 max||0.045 max>||0.10- 0.50||0.044-0.65 max|
ASTM A234 Alloy Steel WP1 Fittings Mechanical properties
|Tensile Strength , MPa||Yield Strength, MPa||Elongation, %||Hardness, HB|
|220 min||415 min||20 min||121-174|
Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- Unichem Steel & Alloy Pvt. Ltd. strive for quality production of ASTM A234 Alloy Steel WP1 Buttweld Pipe Fittings. We adequately test raw materials and conform to DIN, EN, JIS, ASTM, ASME Standards to make the highest quality Alloy Steel Elbow. Chrome Moly Alloy Steel WP1 Concentric Reducer are provided with 100% Radiography Test Report and Third Party Inspection or Buyer Inspection service is available on finished products.
- Value Added Services are provided such as Sandblasting, Epoxy & FBE Coating, Electropolish, Hot dipped galvanizing, or other special finishes, soldering, Threading, Custom shape cutting, fabrication services on ASME SA234 Chrome Moly Alloy Steel WP1 Reducing Cross Pipe Fitting.
- Unichem Steel & Alloy Pvt. Ltd. is an expert in manufacturing of custom size ANSI B16.9 Alloy Steel WP1 Welded and Seamless Pipe Fittings with accurate dimensions and uniform wall thickness.
- We are presently equipped with modern manufacturing equipment and inspection tools such as Milling Machine, Lathe Machines, Heating & Annealing Furnaces, machining, forging and deep drawing presses, finishing and testing facilities. In order to maintain quality and reliability of our Alloy Steel WP1 45 Degree, 90 Degree, and 180 Degree Elbows and Pipe Bends.
- As leading exporters and suppliers we keep a buffer stock of Alloy Steel WP1 Pipe Fittings in all grades from 1/8” NB to 48” NB in Sch 10s, 40s, 80s, 160s, XXS In order to meet the off-hand requirement of our clients.
- Alloy Steel WP1 Pipe Fittings (Buttweld Elbow, Reducers, Tee, Bends, Cross, Stub End, End Caps, Nipple, Collar, etc) are packaged to ensure that there is no damage during transit. In the case of exports, products are packed in wooden cases. All Alloy Steel Gr. WP1 buttweld pipe fittings are marked with Size, Lot No, Grade, Degree, and our trademark. On special requests we make custom marking on pipe fittings.
- Test Certificates: Raw Materials Certificate, Manufacturer Test Certificate as per EN 10204 / 3.1B, Third Party Inspection Report, 100% Radiography Test Report.
- No minimum quantity order limit. Get Market leading prices on all types of Alloy Steel WP1 Pipe Fittings in India.
In Stock Grades of Alloy Steel Buttweld Fittings
- Alloy Steel WP1 Pipe Fittings
- Alloy Steel WP5 Pipe Fittings
- Alloy Steel WP9 Pipe Fittings
- Alloy Steel WP11 Pipe Fittings
- Alloy Steel WP12 Pipe Fittings
- Alloy Steel WP22 Pipe Fittings
- Alloy Steel WP91 Pipe Fittings
Alloy Steel WP1 Buttweld Fittings Manufacturing Standards
|Russian Steel Pipe Fittings Standard|
|Standard Code||Standard Name|
|Gost17375||Low-alloy steel and Carbon butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design|
|Gost17376||Low-alloy steel and Carbon butt-welding fittings. Tees. Design|
|Gost30753||Low-alloy steel and Carbon butt-welding fittings. Sharply curved bends type 2D (R=DN). Design|
|Gost17378||Low-alloy steel and Carbon butt-welding fittings. Reducers. Design|
|Gost17379||Low-alloy steel and Carbon butt-welding fittings. Elliptical caps. Design|
|Gost17380||Low-alloy steel and Carbon butt-welding fittings. General specifications|
|American Steel Pipe Fittings Standard|
|ISO 5251||Steel butt-welding fittings|
|ANSI ASME B16.28||Wrought steel butt-welding short radius elbows and returns|
|ANSI ASME SA-234 / SA234M||Wrought Carbon & Alloy Steel for Moderate & High Temperature Service.|
|MSS SP-75||Forging butt-welding fittings|
|MSS SP-43||Wrought steel butt-welding fittings|
|ANSI ASME B16.9||Factory-Made wrought steel pipe fittings|
|German Steel Pipe Fittings Standard|
|DIN 2617||Steel butt-welding pipe fittings.caps|
|DIN 2615||Steel butt-welding pipe fittings.tees|
|DIN 2605||Steel butt-welding pipe fittings.elbows and bends|
|DIN 2616||Steel butt-welding pipe fittings.reducers|
|Japanese Steel Pipe Fittings Standard|
|JIS B2311||Universal steel butt-welding pipe fittings|
|JIS B2313||Steel plate butt-welding pipe fittings|
|JIS B2312||Steel butt-welding pipe fittings|
|Other Steel Pipe Fittings Standard|
|EN 1025||3 Butt-welding pipe fittings|
Alloy Steel WP1 Pipe Fittings Applications and Uses
- Oil & Gas
- Pharma Industry
- Nuclear Industry
- Pumps and Valves
- Chemical Industry
- Cement Industries
- Aerospace Industry
- Thermal Processing
- Engineering Project
- Boiler Manufacturers
- Pulp and Paper Industry
- Ship Building Companies
- Environmental and Water Projects
- Power Plant / Power Generation
- Off-Shore Oil Drilling Companies
Ready Stock of Alloy Steel WP1 Pipe Fittings in India
|ASME B16.9 WP1 Alloy Steel Reducing Elbow||Grade WP1 Steel Short Radius Elbow|
|Alloy Steel Gr. WP1 90° LR Elbow||Alloy Steel WP1 Pipe Reducers|
|ASTM A234 WP1 Welded Pipe Fittings||ASTM A234 WP1 Seamless Pipe Fittings|
|MSS SP-43 Alloy Steel WP1 Stub Ends||ASTM A234 Alloy Steel WP1 Pipe Caps|
|ASME SA234 WP1 Two Joint Pipe Fittings||Sch 10 Chrome Moly WP1 Concentric Reducer|
|ASTM A234 Alloy Steel WP1 Reducing Tee||ASTM A234 WP1 CrMo Lateral Tee Supplier|
|Sch 80 Alloy Steel WP1 Eccentric Reducer||ASTM A234 WP1 Industrial Buttweld Fittings|
|Chrome Moly Steel WP1 Pipe Cap||ANSI B16.9 Gr. WP1 Weldable 3D Elbow|
|ASTM A234 WP1 45° Long Radius Elbow||Alloy WP1 Short Radius Elbow Exporter|
|Chrome Moly Alloy Steel WP1 Pipe Bends||ASTM A234 Alloy Steel WP1 Pipe Elbow|
|Alloy Steel WP1 Seamless Pipe Fittings||Sch 80 Chrome Moly WP1 Pipe Fittings|
|Alloy Steel WP1 Pipe Fittings Supplier||Alloy Steel WP1 Welded Pipe Fittings Dealer|
|A234 Alloy WP1 180° LR Return Bend||Chrome Moly WP1 Seamless Reducing Tee|
|Alloy Steel WP1 Seamless Pipe Fittings||Alloy WP1 1D Elbow, 3D Elbow, & 5D Elbow|
|Alloy Steel WP1 A234 Weldable 1.5D Elbow||Alloy Steel WP1 Two Halve Butt weld Fittings|
|Alloy Steel WP1 Stub End Exporter||1 Inch Alloy Steel WP1 Buttweld Fittings|
|6 Inch Gr.WP1 Buttweld Pipe Fittings||ASTM A234 WP1 Reducing Nipple|
|Alloy Steel WP1 Pipe Fittings Supplier in Mumbai||Grade WP1 Butt weld Fittings Manufacturer in India|
|ASTM A234 Alloy Steel WP1 Pipe Fittings Dimensions||Alloy Steel WP1 Buttweld Reducing Nipple at Best Price|
ASME SA234 Alloy Steel WP1 Buttweld Fittings Exporter
ASIA: Bangladesh, Cambodia, India, Indonesia, Japan, Malaysia, Maldives, Myanmar, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, Vietnam.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.
NORTH AMERICA: Bahamas, Canada, Costa Rica, Denmark, Jamaica, Mexico, Panama, Puerto Rico, Trinidad And Tobago, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.
ASME SA234 Alloy Steel WP1 Pipe Fittings Supplier
Contact us to get a quick quote for ASTM A234 Alloy Steel WP1 Pipe Fittings.