Stainless Steel 347 Flanges Supplier. ASTM A182 SS 347H Flanges Manufacturer in India.
Unichem Steel & Alloy Pvt. Ltd. is one of the well-known trading houses of SS 347 Flanges, which combines excellent mechanical properties over a wide temperature range with superior oxidation and corrosion resistance. The excellent relaxation resistance of Stainless Steel 347 Slip-On Flanges is a factor in its successful use for springs at temperatures up to 1100 Degree F. Because of these properties, Stainless Steel 347 Threaded Flanges is specified for many fastener applications where superior performance is required under varying environmental conditions. They were made from hot-rolled, annealed, and joined with a diameter in Stainless Steel 347 Weld Neck Flanges by the gas tungsten – arc process. These heat treatments and the applications for which Stainless Steel UNS S34700 Blind Flanges are intended are described in the Mechanical Properties. The microstructure of Stainless Steel 347 Socket Weld Flanges, especially with regard to the effects of heat treatment, has been extensively studied and reported. Stainless Steel 347 Lap Joint Flanges can be strengthened in two ways: (1) by solution treating and age hardening or (2) by cold working and age hardening only. Stainless Steel 347 Ring Joint Type Flanges is an age – hardenable austenitic material, where weldments were found to have room – temperature fatigue strength. Strength of Stainless Steel 347 Spectacle Blind Flanges is largely dependent on the precipitation of a gamma prime phase during heat treatment. Incomparable tests, Stainless Steel 347 Spacer Flanges had fatigue strength.
Largest Manufacturer and Stockist of ASME SA182 Stainless Steel 347H Flanges, SS 347 Slip-on, Weld Neck, High Hub Blind, Raised Face, Socket Weld, Orifice, Ring Type Joint, Threaded, Lap Joint, Square, Long Weld Neck, Spectacle Blind, Paddle Blind, Ring Spacer, Tongue and Groove, Backing Ring, Nipoflange, Weldoflange, Forged, Male & Female, Reducing, Expander Flanges in Mumbai
- Stainless Steel 347/347H Flanges Specifications
- Stainless Steel 347/347H Flanges Equivalent Grades
- SS 347/347H Flanges Chemical Composition
- Stainless Steel 347/347H Flanges Mechanical Properties
- Stainless Steel 347 Flanges Dimensions
- Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- In Stock Grades of Stainless Steel 347 Flanges
- SS 347 Flanges Manufacturing Standards
- SS 347H Flanges Applications and Uses
- SS 347 Flanges Type, Pressure Class, & Size
- ASME SA182 SS 347H Flanges Ready Stock
- ASME SA182 SS 347 Flanges Exporter
- ASTM A182 347H Stainless Steel Flanges Supplier
- SS 347/347H Flanges Chemical Composition
- ASTM A182 F347 Stainless Steel Flanges Types
- SS 347 / 347H Lap Joint Flange
- SS 347 / 347H Square Flange
- SS 347 / 347H Slip On Flange
- SS 347 / 347H Weld Neck Flange
- SS 347 / 347H Blind Flange
- SS 347 / 347H Orifice Flange
- SS 347 / 347H Socket weld Flange
- SS 347 / 347H Threaded Flange
- SS 347 / 347H Long weld Neck Flange
- SS 347 / 347H RTJ Flange
- SS 347 / 347H Reducing Flange
- SS 347 / 347H Forged Flange
Most Trusted Supplier and Exporter of ASTM A182 Stainless Steel 347H Flange, UNS S34700 Pipe Flanges, WNR 1.4550 Flange, 150# SS 347 Flange, ASTM A182 SS F347H Flange in South Africa, Saudi Arabia, Spain, Kuwait, Singapore, Malaysia, UAE, Italy, Nigeria, Iraq, Thailand, Turkey, Vietnam, Oman, Qatar, Myanmar, Sri Lanka.
Stainless Steel 347/347H Flanges Specifications
Specifications
ASME SA182 / ASTM A182.
Standards / Dimensions
ANSI B16.47, MSS SP44, ANSI B16.5, Series A & B, ASA, API-605, AWWA, B16.48, BS 10, BS4504, EN-1092, DIN.
Size Range
1/2″(15 NB) to 48″(1200NB).
Flange Class
150#, 300#, 400#, 600#, 900#, 1500#, 2500#.
Flange Face Type
Flate Face (FF), Ring Type Joint (RTJ), Raised Face (RF).
Pressure
PN6, PN10, PN16, PN25, PN40, PN64 etc.
ASTM A182 F347 Stainless Steel Flanges Types
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Lap Joint Flange, ASTM A182 SS 347H Lap Joint Flange Supplier in Mumbai, India
Stainless Steel 347 Lap Joint Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Square Flange, ASTM A182 SS 347H Square Flange Supplier in Mumbai, India
Stainless Steel 347 Square Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Slip On Flange, ASTM A182 SS 347H Slip On Flange Supplier in Mumbai, India
Stainless Steel 347 Slip On Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Weld Neck Flange, ASTM A182 SS 347H Weld Neck Flange Supplier in Mumbai, India
Stainless Steel 347 Weld Neck Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Blind Flange, ASTM A182 SS 347H Blind Flange Supplier in Mumbai, India
Stainless Steel 347 Blind Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Orifice Flange, ASTM A182 SS 347H Orifice Flange Supplier in Mumbai, India
Stainless Steel 347 Orifice Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Socket weld Flange, ASTM A182 SS 347H Socket weld Flange Supplier in Mumbai, India
Stainless Steel 347 Socket weld Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Threaded Flange, ASTM A182 SS 347H Threaded Flange Supplier in Mumbai, India
Stainless Steel 347 Threaded Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Long weld Neck Flange, Swage Nipple, ASTM A182 SS 347H Long weld Neck Flange Supplier in Mumbai, India
Stainless Steel 347 Long weld Neck Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 RTJ Flange, ASTM A182 SS 347H RTJ Flange Supplier in Mumbai, India
Stainless Steel 347 RTJ Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Reducing Flange, ASTM A182 SS 347H Reducing Flange Supplier in Mumbai, India
Stainless Steel 347 Reducing Flange
ANSI B16.47 / ANSI B16.5 Stainless Steel 347 Forged Flange, ASTM A182 SS 347H Forged Flange Supplier in Mumbai, India
Stainless Steel 347 Forged Flange
Stainless Steel 347/347H Flange Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
---|---|---|---|---|---|
SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
SS 347H | 1.4961 | S34709 | SUS 347H | – | X6CrNiNb18-12 |
Stainless Steel 347/347H Flange Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
---|---|---|---|---|---|---|---|---|---|
SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 10xC – 1.10 | 9.00 – 13.00 | 62.74 min |
SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
Stainless Steel 347/347H Flange Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
347 Stainless Steel Flanges Dimensions
Why Purchase From Unichem Steel & Alloy Pvt. Ltd.
- We at, Unichem Steel & Alloy Pvt. Ltd. design Stainless Steel 347H Industrial Flanges to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb, and 2500lb to satisfy all needs of varied industries in India and Overseas.
- We are producing SS 347 flanges using different dimensional standards such as American Standard Flanges (ANSI/ASME/AWWA), South African Standard Flanges (SABS / SANS), German Standard Flanges (DIN), Russian Standard Flanges (GOST), European Standard Flanges (EN), Petroleum Standard Flanges (API), Japanese Standard Flanges (JIS), MSS Standard Flanges (MSS-SP), British Standard Flanges (BS).
- For SS Grade 347 flanges making we have world-class machinery. In house CNC, Lathe Machines as well as punch dyes required for the production of ASTM A182 SS flanges. Testing facilities like PMI Machine, Spectro machine, Hardness Test, Mechanical test, Hydrostatic Testing, Pressure testing, Ultrasonic Testing, and manual inspection of gauge.
- We strive for quality production of ASME SA182 F347 Stainless Steel Slip-on Flanges. We adequately test raw materials and conform to DIN, EN, MSS, ANSI, ASTM, ASME, JIS Standards to make the highest quality ANSI/ASME B16.5 Stainless Steel 347H Weld Neck Flange. It is provided with 100% Radiography Test Report and Third Party Inspection or Buyer Inspection service is available on finished products.
- Unichem Steel & Alloy Pvt. Ltd. is an expert in manufacturing of custom size ANSI B16.5 / B16.47 Stainless Steel 347 Ring Type Joint Flanges with accurate dimensions and uniform wall thickness.
- As leading exporters and suppliers we keep a buffer stock of 347 Stainless Steel Blind Flange in the size range of 1/2″(15 NB) to 48″(1200NB). In order to meet the off-hand requirement of our buyers.
- SS 347 Flanges are packaged to ensure that there is no damage during transit. In the case of exports, products are packed in wooden cases to make sure that flanges can be reached to the client in the same form as it is manufactured. All Stainless Steel 347 Flanges are marked with Size, Grade, Lot No, and our trademark. On special requests we make custom marking on Flanges.
- In stock flanges to satisfy any urgent needs of customers using international standards: DIN EN 1092-1 covers Blind Flange EN Type 5 and DIN 2527, Threaded Flange EN Type 12 and DIN 2558/2565/2569, Weld Neck Flange EN Type 11 and DIN 2627–2638, Flat Flange EN Type 1 and DIN 2573/2578, Lapped Flange EN Type 2 / Type 4 and DIN 2641/2622/2655/2656.
- We provide Material Test Certificates (MTC) as per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103.
- No minimum quantity order limit. Get Market leading prices on all types of Stainless Steel 347 Flanges in India.
In Stock Grades of Stainless Steel 347 Flanges
Stainless Steel 347 Flanges Manufacturing Standards
British Standard Pipe Flanges Standard | |
BS 10 Table D | Table D Pipe Flange, SS BS 10 Table D Flanges |
BS 10 Table E | Table E Pipe Flange, SS BS 10 Table E Flanges |
BS 10 Table F | Stainless Steel Table E Flanges, SS BS 10 Table E Flanges |
BS 10 Table H | Stainless Steel Table E Pipe Flanges, SS BS 10 Table E Flanges |
Italian Flanges Standard | |
UNI FLANGES | Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Plan flanges (2276, 2277, 2278, 6083, 6084) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) Lapped flanges (6088, 6089, 6090, 2999, 2300) Threaded flanges (2253, 2254) | German Steel Flanges Standard |
DIN 2527 | Steel Blind Flanges, BLRF |
DIN 2573 / 2576 | Flat Flange for Welding (Slip On) |
DIN 2673 | Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars) |
DIN 2641 / 2642 | Lapped / Loose (Lap Joint) Flanges Plain Collars |
DIN 28115 | Long Neck Welding Flanges |
DIN PN10, PN16 | SS DIN PN 10 Flanges, SS PN10 Flanges, SS PN16 Flange |
DIN PN20, PN25 | SS PN20 Flanges, SS DIN PN 25 Flanges |
DIN PN40, PN50 | SS PN40 Flanges, SS DIN PN 50 Flanges |
American Steel Flanges Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged Flanges |
ANSI ASME B16.5 | Slip on flange, Threaded flange, Lap joint flange, Welding neck flange, Blind flange, RTJ flange |
ASME – B 16.47 | Welding neck flange, Blind flange |
ASME – B 16.36 | Welding neck flange Slip on flange |
Japanese Steel Flanges Standard | |
JIS B2220 | Slipon plate flange (SOP), Welding neck flange (WN), Lapjoint (LJ), Slipon Hub (SOH), Socket Welding flange (SW), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) |
JIS B2291 | Slipon plate flange (SOP), Welding neck flange (WN), Lapjoint (LJ), Slipon Hub (SOH), Socket Welding flange (SW), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL) |
JIS 5K, 10K | SS 10K SOFF Flanges, SS 5K SORF Flanges |
JIS 16K, 20K | SS 20K BLRF Flanges, SS 16K Blind Flanges |
JIS 30K, 40K | SS 40K Blind Flanges, SS 30K Slip on Flanges |
Stainless Steel 347 Flanges Applications and Uses
- Power Plant / Power Generation
- Fertilizers
- Oil & Gas
- Refineries
- Chemical Industry
- Pulp and Paper Industry
- Petrochemicals
- Engineering Project
- Environmental and Water Projects
- Boiler Manufacturers
- Pumps and Valves
- Cement Industries
- Aerospace Industry
- Nuclear Industry
- Construction
- Ship Building Companies
- Thermal Processing
- Pharma Industry
- Off-Shore Oil Drilling Companies
347 Stainless Steel Flanges Type, Pressure Class, & Size
Specification | Item Type | Pressure Class | Size Range |
---|---|---|---|
ASME/ANSI B16.5 | Slip-on, Socket Weld, Blind, Weld Neck, Threaded and Lap Joint Flanges | 150 to 2500LBS 150 to 1500LBS |
26“ to 60″ 26“ to 48″ |
ASME/ANSI B16.36 | Orifice Flanges (Slip-on, Weld neck, Threaded) | 300 To 2500LBS | 1″ to 12″ |
ASME/ANSI B16.47 | Orifice Flanges (Slip-on, Weld neck, Threaded) | 75 to 300LBS 400, 600LBS 900LBS |
1/2“ to 12″ 26“ to 60″ 26“ to 48″ |
BS 10 | Blind, Slip-on and Welding neck flanges | TABLE-A, D, E, F, H, J, K, R, S, T | 15mm to 600mm |
ASME/ANSI B16.9/MSS SP-43 | Stub end -Type:A, B, C (Short pattern) | S10, S40, S80 | ½” to 24” |
EN 1092-1 / DIN / BS 4504 Flanges | 01 (Plate flange), 02 (Loose plate flange for Types 32—37), 04 (Loose plate flange for Type 34), 05 (Blind flange), 11 (Weld-neck flange), 12 (Hubbed slip-on flange), 13 (Hubbed | PN2.5 to PN16 PN25 PN40 PN63 PN100 PN160, PN250 PN320 PN400 |
10mm to 1800mm 10mm to 1000mm 10mm to 600mm 10mm to 400mm 10mm to 350mm 10mm to 300mm 10mm to 250mm 10mm to 200mm |
Ready Stock of Stainless Steel 347/347H Flanges in India
High Pressure SS 347 Slip-on Flange | Large Diameter SS 347H Weld Neck Flange |
Stainless Steel 347 Header Flanges | Stainless Steel 347 Screwed Flanges |
ANSI 150 SS 347H High Hub Blind Flange | Stainless Steel 347 Exhaust Flanges |
SS 347H Split Flanges | JIS SUS 347 Square Flanges |
AWWA Stainless Steel 347 Socket Weld Flange | WERKSTOFF NR. 1.4961 Orifice Flange |
Metric Stainless Steel 347 RTJ Flanges | UNS S34709 Class 150 Threaded Flange |
ASTM A182 SS 347H Long Weld Neck Flange | Pn16 Stainless Steel 347 Lap Joint Flange |
Super Austenitic SS 347 Figure 8 Flange | ASME SA182 SS 347H High Hub Flange |
ANSI B16.5 SS 347H Spectacle Blind Flange | Stainless Steel 347 BS10 Table D Flange |
Stainless Steel 347 Table E Flange | GOST 08Ch18N12B Class 600 Expander Flange |
GOST 08Ch18N12B Class 300 Flange | Stainless Steel 347 EN 1092-1 Flange |
150# Stainless Steel 347 Paddle Blind Flange | 1500# Stainless Steel 347 Ring Spacer Flange |
2500# SS 347 Tongue and Groove Flange | EN X6CrNiNb18-10 Raised Face Flange |
EN X6CrNiNb18-12 Flate Face Flange | PN10 Stainless Steel 347 Backup Flange |
PN16 Stainless Steel 347 Forged Flange | PN25 Stainless Steel 347 Reducing Flange |
ASTM A182 SS 347 Blank Flange | ASTM A182 Stainless Steel 347 Rotable Flange |
ASTM A182 SS 347H Conflat Flanges | ASTM A182 SS 347H Anchor Flanges |
Stainless Steel 347H Swivel Flange | Stainless Steel 347H Nipoflange |
Stainless Steel 347H Weldoflange | Stainless Steel 347H Male & Female Flange |
ASME SA182 Stainless Steel 347 Flanges Exporter
ASIA: Bangladesh, Cambodia, India, Indonesia, Japan, Malaysia, Maldives, Myanmar, Singapore, South Korea, Sri Lanka, Taiwan, Thailand, Vietnam.
AFRICA: Algeria, Angola, Egypt, Equatorial Guinea, Gabon, Libya, Nigeria, South Africa, Sudan, The Republic Of Congo.
MIDDLE EAST: Bahrain, Cyprus, Iran, Iraq, Jordan, Kuwait, Oman, Qatar, Saudi Arabia (KSA), Syria, Turkey, United Arab Emirates (UAE), Yemen.
NORTH AMERICA: Bahamas, Canada, Costa Rica, Denmark, Jamaica, Mexico, Panama, Puerto Rico, Trinidad And Tobago, USA.
SOUTH AMERICA: Argentina, Bolivia, Brazil, Chile, Colombia, Ecuador, Guyana, Paraguay, Uruguay, Venezuela.
ASME SA182 Stainless Steel 347 Flanges Supplier
Contact us to get a quick quote for ASTM A182 SS 347 Flanges.